Rateprofile - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Parameters
CHAP|MS-CHAP|MS-CHAP2|PAP
Examples
The following example sets the security protocol to PAP for the RADIUS server named RAD1:
WLC.siemens.com
shared-secret
Use the
shared-secret
command is accessible from the vnsmode:radius:<named_RADIUS_server> context of the CLI.
secret
shared-secret shared secret
Parameters
shared secret
Examples
The following example sets the shared secret to "ebc" for the RADIUS server named RAD1:
WLC.siemens.com
rateprofile
Executing the
rateprofile
contains the following commands to manage bandwidth rate control profiles.
The following commands are available in the vnsmode:rateprofile context:
•
create
on page 262
•
delete
on page 263
•
show
on page 263
create
Use the
command to create a bandwidth rate control profile with an average rate in kbps. You
create
can create up to 128 profiles. The
of the CLI.
In the vnsmode:rateprofile context, use the command to delete a bandwidth rate control profile, and
use the
command to display existing rate control profiles.
show
After you run the
create
SCALANCE WLC711 CLI Reference Guide
Specifies the security protocol that is used between the RADIUS
Server and the Wireless Appliance.
:vnsmode:radius:RAD1# protocol PAP
command to set the shared secret used with the RADIUS server. The
Specifies the shared secret that is used between the RADIUS Server and
the Wireless Appliance
:vnsmode:radius:RAD1# shared-secret ebc
command moves you into the vnsmode:rateprofile context, which
command is accessible from the vnsmode:rateprofile context
create
command, run the
apply
VNS Commands (vnsmode)
command to implement the changes.
shared-secret
shared-
262
Advertisement
Table of Contents
