Timeout; Showvns - Siemens scalance WLC711 Reference Manual

timeout

Use the command to configure the time after which the web session times out. The
timeout
command is accessible from the web context of the CLI.
After you have run the
timeout hh:mm | mm
Parameters
hh:mm
mm
Examples
The following example sets the web session timeout to one hour and 30 minutes:
WLC.siemens.com
The following example sets the web session timeout to two hours (120 minutes):
WLC.siemens.com

showvns

Use the command to display the VNS names in the Wireless AP SSID list on the controller's
showvns
user interface (Wireless AP screen). Use the no form of the command to remove the VNS names in the
Wireless AP SSID list. The
After you have run the
showvns
no showvns
Parameters
None
Examples
The following example displays the VNS names in the Wireless AP SSID list on the controller's user
interface (Wireless AP screen):
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
command, run the
timeout
Specifies time in hh:mm format — hours:minutes, range 1 minute to 7 days.
Specifies time in number of minutes, 1-59.
:web# timeout 01:30
:web# timeout 120
command is accessible from the web context of the CLI.
showvns
command, run the
showvns
:web# showvns
command to implement the changes.
apply
command to implement the changes.
apply
web Commands
timeout
timeout
382