Siemens scalance WLC711 Reference Manual page 164

status
Use the command to enable or disable the Open Shortest Path First (OSPF) protocol on the
status
Wireless Appliance.
status (enable|disable)
Parameters
enable
disable
Examples
The following example enables OSPF on the Wireless Appliance
WLC.siemens.com
ospfinterface
The
ospfinterface
commands to configure Open Shortest Path First (OSPF) protocol options for a port of the Wireless
Appliance. The command supports the specifying of an esaN interface, where N is a number from 0 - 3.
The
ospfinterface
command does not appear on the ip:ospf context command list, you must use the
enable OSPF.
The following commands are available in the ip:ospf:ospfinterface context.
•
add-ospf-interface
•
delete-ospf-interface
add-ospf-interface
Use the
add-ospf-interface
command is available from the ip:ospf:ospfinterface context of the CLI.
interface
The add-
ospf-interface
the layer 3 interface configured. The ospf interface name must be created as a physical or b@ac
topology in the topology context beforeyou execute this command.
add-ospf-interface ospf interface name
Parameters
ospf interface name Specifies the name for the new ospf interface. The name must already be created as
SCALANCE WLC711 CLI Reference Guide
Indicates that the OSPF will be enabled
Indicates that the OSPF will be disabled
:ip:ospf# status enable
command moves you to the context ip:ospf:ospfinterface, which contains
command is accessible from within the ip:ospf context. If the
on page 164
on page 165
command to create a <named-ospfinterface>. The
command is available to the physical topology and the b@ac topology with
a physical or b@ac topology in the topology context.
ip Commands
status
ospfinterface
command to
status
add-ospf-
164