Siemens scalance WLC711 Reference Manual page 95

Example
Example code is not currently available.
assign-wlan
Use the
assign-wlan
use this command to unassign a WLAN service from a load group. The
accessible from the ap:load-groups:<named-load-group> context of the CLI, for both types of load
groups.
assign-wlan add | delete WLAN name
Parameters
add | delete
WLAN name
Assign a WLAN service to the load group. Assigning a WLAN service to the load group also assigns the
WLAN service to the load group's Wireless APs.
Examples
The following example assigns the WLAN service named Lab45-WPA to the client load group named
clientgroup1:
WLC.siemens.com
bandpreference
Use this command to enable or disable the band preference feature for all APs in a radio type load
group. The
bandpreference
context of the CLI, for the radio type of load group.
bandpreference enable | disable
Parameters
enable
disable
Examples
This example enables band preference steering for the radio load group named radiogroup1:
WLC.siemens.com
name
Use the command to change the name of a load group.The
name
the ap:load-groups:<named-load-group> context of the CLI, for both types of load groups.
SCALANCE WLC711 CLI Reference Guide
command to assign a WLAN service to both types of load groups. You can also
Use add to assign a WLAN service to a load group. Use delete to unassign
a WLAN service from a load group.
The name of the WLAN service.
:ap:load-groups:clientgroup1# assign-wlan add Lab45-WPA
command is accessible from the ap:load-groups:<named-load-group>
Enable band preference steering.
Disable band preference steering. The default condition is disabled.
:ap:load-groups:radiogroup1# bandpreference enable
ap Commands
assign-wlan
command is
assign-wlan
command is accessible from
name
95