Siemens scalance WLC711 Reference Manual page 375

Example
name
Use the command to change the name of a topology group. The
name
from the topology group name context of the CLI.
name topology_name
Parameters
topology_name
Usage
The group member must have same topology mode type as the toplogy group.
Example
show
Use the command to display information about a topology group. The
show
from the topology:topology-group:top-group-name context of the CLI.
show
Parameters
None
Example
The following example shows topology group configuration information:
C5110-2.chantry:topology:topology-group:TG5# show
Topology mode: routed
Name: TG5
VLAN ID: 105
Member List: V801data:Topology
vlanid
Use the command to change the VLAN ID of a topology group. The
vlanid
accessible from the topology group name context of the CLI.
vlanid id
Parameters
id
Usage
The group member must have same topology mode type as the toplogy group.
SCALANCE WLC711 CLI Reference Guide
Specifies a topology name.
Specifies a VLAN ID number. Valid VLAN ID numbers are 1-4094.
topology Commands
command is accessible
name
command is available
show
command is
vlanid
name
375