Delete; Nac - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
The following commands are available in the vnsmode:default-role:apfilters context:
•
create
on page 268
•
config
on page 271
•
delete
on page 273
•
move
on page 273
delete
Use the
command in vnsmode to delete an existing VNS.
delete
delete VNS name
Parameters
VNS name
Examples
The following example deletes the VNS named guestportal:
WLC.siemens.com
nac
Executing the
nac
commands to manage NAC configuration.
The following commands are available in the vnsmode:nac context:
•
create
on page 246
•
delete
on page 247
•
show
on page 247
create
Use the
command to create an NAC server configuration. The NAC server accepts DHCP
create
messages. The
create
create an NAC server configuration, you can further configure it by entering the vnsmode:nac:<named-
NAC-server> context. See
create name A.B.C.D
Parameters
name
A.B.C.D
SCALANCE WLC711 CLI Reference Guide
Specifies the VNS to delete.
:vnsmode:delete guestportal
command moves you into the vnsmode:nac context, which contains the following
command is accessible from the vnsmode:nac context of the CLI. After you
radius
on page 249.
Specifies the name of the NAC server
Specifies the IP address of the NAC server
VNS Commands (vnsmode)
delete
246
Advertisement
Table of Contents
