Interval; Unit; Push-List - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
interval
Use the
interval
the location:publish context.
interval minutes
Parameters
minutes
Usage
Location push must be enabled using the
affect.
Examples
The following example sets the location push interval to 30 minutes:
WLC.siemens.com
unit
Use the
command to set the location push unit to either meters or feet. This command is available
unit
from the location:publish context.
unit (0 | 1)
Parameters
0 | 1
Examples
The following example sets the push unit to meters:
WLC.siemens.com
push-list
Use the
push-list
location:publish context.
push-list [add | delete] url [url]*>
SCALANCE WLC711 CLI Reference Guide
command to configure the push interval in minutes. This command is available from
Specifies the number of minutes for the push interval. Valid values are: 1, 2, 5, 10, 20,
30, 60, 120, or 240 minutes.
push enable
:location:publish# interval 30
Specifies whether the push unit is in meters (0) or feet (1).
:location:publish# unit 0
command to configure a push URL list. This command is available from the
command for the interval command to take
Publish Commands
interval
416
Advertisement
Table of Contents
