Siemens scalance WLC711 Reference Manual page 253

Parameters
actual-user
rfc5997
Examples
This example sets the RADIUS server polling-mechanism to rfc5997:
WLC.siemens.com
rfc5997
show
Use the command to display RADIUS server configuration information. The
show
accessible from the vnsmode:radius context of the CLI.
show [RADIUS_server]
Parameters
RADIUS_server
Examples
The following example displays a list of RADIUS server configuration information:
WLC.siemens.com
Strict: disable
Radius MAC format: 1. XXXXXXXXXXXX
Client Access-Request includes Service-Type Attribute: disable
Name IP address
Ports(Auth:Acct)
RADIUS_1 192.0.1.202
1812:1813
The following example displays configuration information for the RADIUS server named "RADIUS_1":
WLC.siemens.com
Authentication port: 1812
Accounting port: 1813
Authentication priority: 1
Accounting priority: 1
Authentication total number of tries: 3
Accounting total number of tries: 3
Authentication RADIUS request timeout: 5
Accounting RADIUS request timeout: 5
Interim accounting interval: 30
Default protocol: PAP
Shared secret: **********
Name: RADIUS_1
Radius IP: 192.0.1.202
SCALANCE WLC711 CLI Reference Guide
Sets the RADIUS server polling-mechanism to actual-user.
Sets the RADIUS server polling-mechanism to rfc5997.
:vnsmode:radius:<named_RADIUS_server># polling-mechanism
Specifies to display information about the specific RADIUS server
:vnsmode:radius# show
Protocol Retries(Auth:Acct)
Priority(Auth:Acct)
PAP 3:3
1:1
:vnsmode:radius# show RADIUS_1
VNS Commands (vnsmode)
command is
show
Timeout(Auth:Acct)
5:5
show
253