Siemens scalance WLC711 Reference Manual page 326

priority-map
Use the
priority-map
by mapping Service Class user priority levels to DSCP codepoints. The
accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.
After you run the
priority-map
priority-map dscp 0-64 user-priority 0-7
Parameters
dscp 0-64
user-priority 0-7
Example
The following example assigns a Service class of 7 to DSCP codepoint 24:
WLC.siemens.com
priority 7
WLC.siemens.com
WLC.siemens.com
DSCP CLASSIFICATION
dscp-marking
0
1
.
23
24
25
priority-override
Use the
priority-override
priority-override
of the CLI.
After you run the
priority-override
priority-override enable | disable
Parameters
enable | disable
Example
The following example overrides priority for all packets on WLANS CNL-7-CP:
WLC.siemens.com
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
command to configure Differentiated Service Code Point (DSCP) classification
command, run the
Specifies a DSCP codepoint value.
Specifies the Service Class value to be assigned to a DSCP codepoint.
:wlans:CNL-7-CP:qos-policy# priority-map dscp 24 user-
:wlans:CNL-7-CP:qos-policy# apply
:wlans:CNL-7-CP:qos-policy# show priority-map
service-class
02
00
00
07
00
command to override the priority for all packets in the WLANS. The
command is accessible from the wlan:<WLAN-service-name>:qos-policy context
command, run the
Enables or disables priority override for all packets in the WLANS.
:wlans:CNL-7-CP:qos-policy# priority-override enable
:wlans:CNL-7-CP:qos-policy# apply
priority-map
command to implement the changes.
apply
command to implement the changes.
apply
wlans Commands
priority-map
command is
326