Show; Trap-Manager-V1V2 - Siemens scalance WLC711 Reference Manual

3
4
5
Example
The following example forwards traps having the Critical level of severity:
WLC.siemens.com

show

Use the command in the SNMP context to display all SNMP configuration information or just
show
information about configured SNMPv3 users.
show [user]
Parameters
user
Examples
The following example lists only the SNMPv3 users, when in the SNMP context:
WLC.siemens.com
User Authentication
test1 noauthnopriv
Refer to user on page 218 for descriptions of the values in the various columns of this output.

trap-manager-v1v2

Use the
trap-manager-v1v2
monitoring SNMPv1/v2 traps by IP address.
trap-manager-v1v2 1|2 (IP Address | delete)
Parameters
1|2
IP Address
delete
SCALANCE WLC711 CLI Reference Guide
Forwards the SNMP trap with the Minor severity level
Forwards the SNMP trap with the Informational severity level
Forwards the SNMP trap with the Trace severity level
.com:snmp# severity 2
Display only configured users.
:snmp# show user
ProtocolAuth
none
command to identify either the primary or secondary machine
Identifies the primary or secondary machine monitoring SNMPv1/v2 traps
Specifies the IP address of the machine monitoring SNMPv1/v2 traps. The IP
address can be either IPv4 (A.B.C.D) or IPv6 (A:B:C:D:E:F:G:H) format.
Delete the specified trap manager.
ProtocolPriv Enabled
none False
snmp Commands
show
217