Trap-Manager-V3; User - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Examples
The following example specifies the IP address of the primary machine monitoring SNMPv1/v2 traps:
WLC.siemens.com
The following example deletes the secondary machine monitoring SNMPv1/v2 traps:
WLC.siemens.com
trap-manager-v3
Use the
trap-manager-v3
SNMPv3 traps by IP address.
trap-manager-v3 (1|2) (IP address | delete)
Parameters
1|2
IP address
delete
Examples
The following example specifies the IP address of the primary machine monitoring SNMPv3 traps and
the SNMPv3 user "admin":
WLC.siemens.com
The following example deletes the primary trap manager configured in the previous example:
WLC.siemens.com
user
Use the
command to configure SNMP v3 users and security.
user
user username security (noAuthNoPriv | authNoPriv (md5|sha) authpassword |
authPriv (md5|sha) authpassword des privpassword)
user username disable|enable
user username delete
SCALANCE WLC711 CLI Reference Guide
:snmp# trap-manager-v1v2 1 192.168.1.5
:snmp# trap-manager-v1v2 2 delete
command to identify either the primary or secondary machine monitoring
Identifies the primary or secondary machine monitoring SNMPv3 traps
Specifies the IP address of the machine monitoring SNMPv3 traps. The IP address
can be either IPv4 (A.B.C.D) or IPv6 (A:B:C:D:E:F:G:H) format.
Removes the SNMPv3 machine monitoring SNMPv3 traps
:snmp# trap-manager-v3 1 192.168.1.5
:snmp# trap-manager-v3 1 delete
snmp Commands
trap-manager-v3
218
Advertisement
Table of Contents
