Siemens scalance WLC711 Reference Manual page 399

local-radius (enable | disable)
Parameters
enable | disable
Usage
You must enter the
authentication change to take affect. The CLI prompt does not change until you exit and re-enter the
site:<named-site> context.
Example
The following example enables local authentication on site1:
WLC.siemens.com
move
Use the command to change the order of this authentication server on this site. The
move
command is accessible from the site:<named-site> context.
move 1-32 1-32
Parameters
1-32
Usage
The CLI <named-site> context must be in config mode for a RADIUS server, to execute the
command. Use the
config mode.
You must enter the
change to take affect. The CLI prompt does not change until you exit and re-enter the site:<named-
site> context.
Example
The following example moves the authentication server from position 1 to 2 in the order:
WLC.siemens.com
name
Use the command to change the name of a site. The
name
site:<named-site> context.
SCALANCE WLC711 CLI Reference Guide
Enables or disables local RADIUS authentication.
command before exiting the site:<named-site> context for the RADIUS
apply
:site:site1# local-radius enable
Specifies a value in an ordered list of servers for this authentication server on this
site. Enter the first (current) position of the server, then the new position of the
server in the server order.
config <radius name>
command before exiting the site:<named-site> context for the site name
apply
:site:site1# move 1 2
command to enter config mode. Use config exit to exit
command is accessible from within the
name
site Commands
move
move
move
399