Siemens scalance WLC711 Reference Manual page 332

•
show on page 334
•
ssid-suppress on page 335
11h-power-reduction
Use the
11h-power-reduction
transmissions using the 802.11h standard. The
wlan:<WLAN-service-name>:rf context of the CLI.
After you run the
11h-power-reduction
changes.
11h-power-reduction enable | disable
Parameters
enable | disable
Example
The following example enables the power reduction feature on the WLAN service:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Apply power reduction to 11h clients: enable
11h-support
802.11h support on the Wireless Appliance will allow clients to operate with the maximum available
transmission power in 5Ghz bands. The
service-name>:rf context of the CLI.
Use the
11h-support
After you run the
11h-support
11h-support enable | disable
Parameters
enable | disable
Example
The following example enables 802.11h support on the WLAN service:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Enable 11h support: enable
SCALANCE WLC711 CLI Reference Guide
command to enable or disable automatic power reduction of
11h-power-reduction
command, run the
Enables or disables automatic power reduction of transmissions using the 802.11h
standard.
:wlans:test:rf# 11h-power-reduction enable
:wlans:test:rf# apply
:wlans:test:rf# show 11h-power-reduction
11h-support
command to enable 802.11h support on the WLAN service.
command, run the
Enables or disables 802.11h support on the Wireless Appliance.
:wlans:test:rf# 11h-support enable
:wlans:test:rf# apply
:wlans:test:rf# show 11h-support
command is accessible from the
command to implement the
apply
command is accessible from the wlan:<WLAN-
command to implement the changes
apply
wlans Commands
11h-power-reduction
332