Siemens scalance WLC711 Reference Manual page 69
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
show syslog
Parameters
None
Examples
The following example displays the current system log levels:
WLC.siemens.com
syslogip 1
192.168.3.106 enable
syslogip 2
192.168.4.129 enable
syslogip 3
192.168.4.200 enable
svcmsg
audmsg
stationevent enabled
facility application 0
facility service 4
facility audit 6
facility station 1
show system_state
Use the
show system_state
show system_state process | cpu | memory | disk | mgmt | uptime | info |
manufacturing
Parameters
process
cpu
memory
disk
mgmt
uptime
info
manufacturing
Examples
Example code is not currently available.
show tech_support
Use the
show tech_support
system.
SCALANCE WLC711 CLI Reference Guide
# show syslog
command to display the Wireless Appliance's system information.
Displays the current CPU and memory usage of system processes.
Displays the amount of CPU usage.
Displays the amount of memory being used on the system.
Displays the hard-disk usage by folder.
Displays the system management settings.
Displays the amount of time the system has been running continuously.
Displays the information on various processes run by the system.
Displays hardware information about the controller.
command to display a list of technical support files available on the
root Commands
show system_state
69
Advertisement
Table of Contents
