Das - Siemens scalance WLC711 Reference Manual

Parameters
vns name
wlans WLANS name
pol role-name
Usage
When you create a VNS, if the referenced WLAN Service has a mode of:
•
"std" then the referenced role must have a topology of mode "b@ap," "b@ac," or "routed"
•
"3pap" then the referenced role must have a physical topology mode
•
"wds" then the referenced role must have a null topology
Example
The following example creates a VNS named testvns and assigns it a WLAN Service named "WLC-1"
and a role named "NonAuth":
WLC.siemens.com

das

Use the command to configure DAS (Dynamic Authorization Server) settings. Executing the
das
command puts you in the vnsmode:das context where the following commands are available.
The following commands are available in the vnsmode:das context:
•
port on page 242
•
replay_interval
port
Use the command to configure the DAS port. The
port
vnsmode:das context.
port 1024-65535
Parameters
1024-65535
Examples
The following example sets the DAS port number to 3799:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
Specifies a name for this VNS
Specifies a WLAN Service for this VNS
Specifies the non-authentication role for this VNS
:vnsmode# create testvns wlans WLC-1 pol NonAuth
on page 243
Specifies the DAS port.
:vnsmode:das# port 3799
VNS Commands (vnsmode)
command is available from the
port
das
das
242