Siemens scalance WLC711 Reference Manual page 374

Parameters
None
Example
The following example shows topology group configuration information:
C5110-2.chantry:topology:topology-group:TG5# show
Topology mode: routed
Name: TG5
VLAN ID: 105
Member List: V801data:Topology
<topology-group-name>
Executing the
<topology-group-name>
group-name context, in which you can add, update, or delete topology group name members or
display topology group name information. The
topology:topology-group context.
The following commands are available in the topology:topology-group:top-group-name context.
•
members on page 374 to add, update, or delete a topology group member
•
name to change the topology group name
•
show on page 375
•
vlanid
members
Use the command to add, update, or delete a topology group member. The
members
command is accessible from the topology group name context of the CLI.
members [(add|update|delete)] topology_name [topology_name]*
Parameters
add
update
delete
topology_name
[topology_name]*
Usage
The group member must have same topology mode type as the toplogy group.
SCALANCE WLC711 CLI Reference Guide
command moves you into the topology:topology-group:top-
<topology-group-name>
Specifies that a new topology name is being added to the group.
Specifies the topology name of an existing member that is being updated
for the group.
Specifies the topology name of an existing member that is being removed
from the group.
Specifies a topology name.
Optionally, specifies one or more additional topology names separated by a
space.
topology Commands
<topology-group-name>
command is entered in the
members
374