Siemens scalance WLC711 Reference Manual page 154

Note
The
professional_antenna
feature, including ap37xx, ap38xx, ap3801, and later APs.
The following professional antenna configuration commands are available in the
ap:<serial>:professional_antenna context:
•
leftantenna-radio1
•
leftantenna-radio2
•
middleantenna-radio1
•
middleantenna-radio2
•
rightantenna-radio1
•
rightantenna-radio2
•
show on page 116
rightantenna-radio1
Use the
rightantenna-radio1
command is accessible from the <serial> context of the CLI if the AP supports configuration of a right
radio1 antenna. To display a list of the available antenna models, enter the command without
arguments. The
rightantenna-radio1
CLI. Additionally, for AP models that support the Professional Install feature,
also accessible from the ap:<serial>:professional_antenna# context.
The antenna commands available are dependent on the AP type.
rightantenna-radio1 antenna_model
Parameters
antenna_model
Examples
This example lists the valid antenna models that can be entered with this command, then executes the
command with an appropriate model number:
WLC.siemens.com
radio1 <antenna_model>
antenna_model:
<list of valid antenna models>
WS-AO-2S03360 G 3.5 dBi Omni
No Antenna
WLC.siemens.com
dBi Omni
This example removes a configured right radio1 antenna:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
command is available for APs that support the Professional Install
on page 150
on page 151
on page 152
on page 154
on page 155
command to select an antenna supported by the Wireless AP. This
command is accessible from the ap:<serial> context of the
Model name of an antenna supported by the Wireless AP.
:ap:0500010032150135# rightantenna-radio1 Usage: rightantenna-
:ap:0500010032150135# rightantenna-radio1 WS-AO-2S03360 G 3.5
:ap:0500010032150135# rightantenna-radio1 No Antenna
ap Commands
rightantenna-radio1
is
rightantenna-radio1
154