Wlan Background Scan Interval (Client) - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Network structures
6.1 WLAN
Further notes
You display the setting with the
You enable the function with the
See also
wlan any ssid (Client) (Page 152)
6.1.5.16
wlan background scan interval (client)
Description
With this command, you specify the Interval at which the client scans for further access
points.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan background scan interval <ms(300-60000)>
The parameter has the following meaning:
Parameters
ms
Result
The interval is specified.
Further notes
You show the set interval with the
154
show wlan client <wlan 0/X>
command (default setting).
wlan any ssid
Description
Time in milliseconds (ms) 300 ... 60 000
show wlan client <wlan 0/X>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
command.
Values or range of values
Default: 5000
command.
Advertisement
Table of Contents
