Configuration Managed Mode Parameters; Table 5- 1 Managed Mode Commands - Siemens SCALANCE W1750D UI Configuration Manual

Automatic Retrieval of Configuration

5.2 Configuration Managed Mode Parameters

5.2 Configuration Managed Mode Parameters
To enable the automatic configuration, perform the steps described in the following table:
Table 5- 1 Managed Mode Commands
Steps
1. Start a CLI session to configure the man-
aged-mode profile for automatic configuration.
2. Enable automatic configuration Or
Specify the user credentials.
3. Specify the configuration file.
4. Specify the configuration file download meth-
od.
5. Specify the name of the server or the IP
address of the server from which the configura-
tion file must be downloaded.
6. Configure the day and time at which the APs
can poll the configuration files from the server.
7. Configure the time interval in minutes be-
tween two retries, after which APs can retry
downloading the configuration file.
8. Apply the configuration changes.
42
Command
(scalance)(config)# managed-mode-profile
(scalance)(managed-mode-profile)# automatic
Or
(scalance)(managed-mode-profile)# username <username> (scal-
ance)(managed-mode-profile)# password <password>
NOTE: If the automatic mode is enabled, the user credentials are auto-
matically generated based on AP MAC address.
(scalance)(managed-mode-profile)# config-filename
<file_name>
Filename—Indicates filename in the alphanumeric format. Ensure that
configuration file name does not exceed 40 characters.
(scalance)(managed-mode-profile)# download-method
<ftp|ftps>
You can use either FTP or FTPS for downloading configuration files.
(scalance)(managed-mode-profile)# server <server_name>
(scalance) (managed-mode-profile)# sync-time day <dd> hour
<hh> min <mm> window <window>
Based on the expected frequency of configuration changes and mainte-
nance window, you can set the configuration synchronization timeline.
l >—Indicates day, for example to configure Sunday as the day,
day <dd
specify 01. To configure the synchronization period as everyday, specifiy
00.
l —Indicates hour within the range of 0–23.
hour <hh>
l —Indicates minutes within the range of 0–59.
min <mm>
l —Defines a window for synchronization of the configura-
window <hh>
tion file. The default value is 3 hours.
(scalance)(managed-mode-profile)# retry-poll-period
<seconds>
NOTE: Specify the retry interval in seconds within the range of 5–60
seconds. The default retry interval is 5 seconds.
(scalance)(managed-mode-profile)# end (scalance)# commit
apply
Configuration Manual, 02/2018, C79000-G8976-C451-02
SCALANCE W1750D UI