Radius Client; The "Show" Commands - Siemens SCALANCE W770 Series Configuration Manuals

Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
password policy < low | high >
The parameters have the following meaning:
Parameter
low
high
Result
The password policy is specified:
Further notes
You assign a new password with the user-account command.
You display the setting with the show password-policy command.
11.2

RADIUS client

RADIUS (Remote Authentication Dial-In User Service) is a client/server protocol that allows
the centralized logging in of users logging on in a physical or virtual network. This makes central
administration of user data possible.
This section describes commands relevant for the configuration of this service.
11.2.1

The "show" commands

This section describes commands with which you display various settings.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
Password policy: Low
Password policy: High
Security and authentication
11.2 RADIUS client
Range of values / note
Password length: at least 6 characters
Password length: at least 8 characters
at least 1 uppercase letter
at least 1 special character
at least 1 number
487