SSANGYONG Kyron Repair Manual page 560

Hide thumbs Also See for Kyron:

Table of Contents

Coolant Circulating Route

Connecting the Coolant Circuit

The heater is connected to the coolant circuit in the coolant feed pipe from the vehicle engine to the

heat exchanger.

• Parts conveying coolant must be routed and fastened in such a way that they pose no temperature risk to

person or material sensitive to temperature from radiation and direct contact.

• Before working on the coolant circuit, disconnect the negative battery cable and wait until all compo-

nents have cooled down completely.

• When installing the heater and the water pump, note the direction of flow of the coolant circuit.

• Fill the heater and water hoses with coolant before connecting to the coolant circuit.

• When routing the coolant pipes, observe a sufficient clearance to hot vehicle parts.

• Protect all coolant hoses/coolant pipes from chafing and from extreme temperatures.

• Secure all hose connections with hose clamps.

AIR CONDITIONING SYSTEM

KYRON SM - 2005.09

Heating system

EFFECTIVE DATE

Heater module

AFFECTED VIN

Chapters

Table of Contents