SSANGYONG Kyron Repair Manual page 320

16
4411
Removal and Installation
1. The lower arm mounting bolts/nuts on the frame (LH/RH)
Tightening torque: 180 ~ 190 Nm
: Before removing lower arm assembly, make the alignment marks on the mounting
nut (14 mm) on the frame and camber adjusting bolt (14 mm).
NOTE
• Always perform the wheel alignment procedures af-
ter removing and reinstalling the lower arm assembly.
2. Unscrew the lower nut of stabilizer bar link and the lower nut of
coil spring/shock absorber yoke.
Lower link nut (12 mm)
SUSPENSION
KYRON SM - 2005.09
Lower yoke nut (24 mm)
Tightening torque
1. Lower link nut (110 ~ 130 Nm)
2. Lower shock absorber yoke nut (150 ~ 170 Nm)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN