SSANGYONG Kyron Repair Manual page 529

Removal and Installation
Preceding Work: Disconnect the negative battery cable.
First remove the driver side instrument lower panel in order to remove and install mode door actuator.
For removal and installation of the panel, refer to "BODY" section.
1. Remove the lower instrument panel in front of driver seat. Disconnect the mode door actuator connector and
remove two mounting screws.
2. Separate the mode door actuator and remove the mode door link assembly.
Foot mode door lever
NOTE
• Make sure that the mode door link mounted on the air conditioner module assembly. When
installing, if the location of the mode door link is not correct, may not operate properly.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Face mode door lever
Windshield mode
door lever
35
6810
Bi-level
Vent
Defroster and foot
Foot
AIR CONDITIONING SYSTEM
KYRON SM - 2005.09