Control And Operating Conditions; Seat Position Memory - SSANGYONG Kyron Repair Manual

Hide thumbs Also See for Kyron:

Table of Contents

5. CONTROL AND OPERATING CONDITIONS

Seat Position Memory Operation

1. To store the seat position and the outside rearview mirror position, press the SET button and, within 5 seconds,

press one of position switches. The memory setting is available for up to 3 different drivers.

2. The memory set mode is only available within 5 seconds after pressing the SET button.

3. If any of the following conditions is met, the memory set mode is canceled.

1) No switch inputs within 5 seconds after pressing SET button.

2) When adjusting the seat or outside rearview mirror positions during the memory recall operation.

3) When turning off the ignition switch.

4) When pressing the STOP button

5) When the memory setting is completed.

4. The memory recall is not available when the vehicle speed is over 3 km/h or the gear shift lever is not in "P"

position with the parking brake released.

5. The memory set can be unlimitedly renewed.

6. The stored positions are erased when disconnecting the battery cables.

7. The buzzer sounds once if the memory set mode is activated.

8. The buzzer sounds twice if the memory setting/recalling is completed.

9. The buzzer sounds three times if an error is found in the sensor during the memory recall operation.

EFFECTIVE DATE

AFFECTED VIN

Cannot memorize

SEAT POSITION WITH MEMORY

KYRON SM - 2005.09

Table of Contents