SSANGYONG Kyron Repair Manual page 447

61
4890
Cautions When Removing the Front Wheel Speed Sensor
The locking hub system of the KYRON part time 4WD utilizes a different hub actuator from the conventional
approach. It utilizes IWE (Integrated Wheel End) system that locks the 4WD depending on the vacuum condition
within the actuator.
Thus, the wheel speed sensor is installed on the front wheel end area. It is installed inside the backing plate to
be protected from heat and foreign materials. Therefore, the front wheel end system (including disc) should be
removed before removing the front wheel speed sensor.
Front Wheel Speed Sensor Rear Wheel Speed Sensor
Backing Plate
Wheel Speed Sensor
Backing Plate
Wheel Speed Sensor
ABS/ESP SYSTEM
CHANGED BY
EFFECTIVE DATE KYRON SM - 2005.09
AFFECTED VIN