SSANGYONG Kyron Repair Manual page 599

Hide thumbs Also See for Kyron:

Table of Contents

Washer Coupled Wiper in Rain Sensing Mode

1. The washer coupled wiper is operated when receiving the washer switch input with the ignition switch "ON" and

the auto INT switch "ON" in the rain sensing mode. At this moment, the communication with the rain sensor is

overridden. However, the washer switch input is overridden during the continuous operation.

2. The operation data is sent to the rain sensor even during the washer coupled wiper's operation.

Override Rain

Rain Sensing Sensitivity Control

1. The wiper LOW relay is turned on and the wiper motor runs one cycle when the volume sensitivity is increased (while

the ignition key is in the "ON" position, the wiper switch is in the "ON" position, and the wiper motor is in "Parked"

position). However, the wiper motor can be operated only when the rain sensor detects the "Rain Detected" signal.

* If the volume sensitivity is changed more than 2 stages within 2 seconds, the wiper motor runs only one cycle.

Rain Detected

EFFECTIVE DATE

AFFECTED VIN

RKSTICS (REKES + STICS) / STICS

KYRON SM - 2005.09

Chapters

Table of Contents