Functions - SSANGYONG Kyron Repair Manual

Hide thumbs Also See for Kyron:
Table of Contents

Advertisement

6
8510

3. FUNCTIONS

HDC Switch
When you press the HDC switch, the green HDC indicator comes on,
and when the HDC operates, the green HDC indictor blinks with 0.5
second of interval.
The HDC system is an automatic descent control device that allows
the vehicle to automatically decelerate to about 7 km/h by 0.1G, on
steep roads (slope level exceeding 10%) through a separately installed
switch operation. When the vehicle speed reaches below 7 km/h (refer
to the information below), the HDC automatically terminates the
operation.
Hazard Switch
TRIP Switch
To choose a desired driving distance display mode, press the
switch: Changing sequence: ODO - TRIP A - TRIP B - ODO
TRIP A/B display will be initialized to 0 km when the dis-
tance of an individual trip exceeds 999.9 km. If you press
and hold the reset button for more than one second in TRIP
A or TRIP B mode, the trip ODO meter resets to zero.
TRIP A
TRIP B
ODO
SWITCHES / ELECTRIC DEVICES
KYRON SM - 2005.09
Unit: 0.0 ~ 999.9 km
Unit: 0.0 ~ 999.9 km
Unit: 0 ~ 999999 km
NOTICE
• The G sensor in sensor cluster
measures the actual road
steepness. However, it may
recognize a sharp turn or rough
road as a downhill road with a
slope level exceeding 10%, and
the HDC may operate.
Tailgate Glass & Outside Rearview Mirror
Heated Glass Switch
1. Press this switch to turn on the tailgate
and outside rearview mirror heated glass.
It will operate for about 12 minutes.
2. Press the switch again to stop the
operation.
3. This switch is designed to defrost and defog
on tailgate glass and outside rearview
mirrors.
4. The heated glass will operate for about 6
minutes when the switch is pressed again
within 10 minutes after completion of its
first operation cycle.
5. The indicators in the switch come on when
in use.
Windshield Heated Glass Switch
This switch is designed to defrost and defog on
windshield.
1. Press this switch to turn on the windshield
heated glass. It will operate for about 12 minutes.
2. Press the switch again to stop the operation.
3. The indicators in the switch come on when in
use.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

Advertisement

Table of Contents
loading

Table of Contents