SSANGYONG Kyron Repair Manual page 378

26
4610
Steering Column Shaft
Preceding Work: Disconnect the negative battery cable and place the tires to straight ahead direction.
Removal and Installation
1. Unscrew the screws at both sides of steering wheel and remove the horn pad (air bag module). Disconnect the
airbag module connector.
2. Unscrew the steering wheel lock nut and remove the wheel with special tool.
NOTICE
• Make an alignment marks on the column shaft and steering wheel for correct installation.
Tightening torque: 40 ~ 60 Nm
3. Remove the instrument panel side cover and unscrew the side lock bolt and screws to remove the instrument lower panel.
POWER STEERING SYSTEM
KYRON SM - 2005.09
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN