Diagnosis Trouble Code And Help Tips - SSANGYONG Kyron Repair Manual

5. DIAGNOSIS TROUBLE CODE AND HELP TIPS

Fault Code Malfunction
Dr Door Lock Knob
01
Ps Door Lock Knob
02
Rr Door Lock Knob
03
T/Gate Lock Knob
04
Door Lock Output
05
Door Unlock Output
06
C/DR Lock Output
07
DR Lock Output
08
PS Lock Output
09
10 Auto Door Lock Output
Auto Door Unlock Output
11
Wiper Output
12
SPEED SIGNAL
13
INT WIPER Volume
14
SPEED SENSOR
15
A/BAG COLLISION
16
SENSOR INPUT
A/BAG COLLISION
17
SENSOR OUTPUT
A/BAG COLLISION
18
MONITOR
19 Door Ajar Warning IND
20 PARKING BRAKE IND
Auto Washer Out
21
WASHER RELAY
22
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Driver's door lock knob is not operated when locking/unlocking doors.
Passenger's door lock knob is not operated when locking/unlocking
doors.
Rear door lock knob is not operated when locking/unlocking doors.
Tailgate lock knob is not operated when locking/unlocking doors.
All door lock knob are not moved to lock position even when the door
lock relay is activated.
All door lock knob are not moved to unlock position even when the
door unlock relay is activated.
Doors are locked by central door lock switch while the engine is
running.
Doors are locked by driver's door lock switch while the engine is running.
Doors are locked by passenger's door lock switch while the engine is
running.
Door lock knob is not moved to lock position when the system out-
puts auto door lock signal while the ignition switch is in ON position
and the vehicle speed is over 50 km/h.
Door lock knob is not moved to unlock position after receiving the
output from collision sensor.
The WIPER P-POS signal is not detected when the wiper relay is
activated.
The vehicle speed over 3 km/h is detected at the speed signal area
while the ignition switch is in ON position and the alternator signal is
"D" LOW.
The circuit is open (over 4.5 V) when changing the INT volume in the
speed sensitive INT wiper (saved as history error).
The vehicle speed over 200 km/h is detected (saved as history error).
A signal is sent to the collision sensor input area while the ignition
switch is in OFF position (saved as history error unconditionally).
The RKSTICS outputs UNLOCK signal after receiving collision sensor
input while the ignition switch is in ON position (saved as history
error).
The STICS outputs the Door Unlock signal due to the collision sensor
and the feedback value is in proper range (saved as history error).
The door warning indicator blinks when the vehicle speed is over
10 km/h (saved as history error).
The parking brake indicator blinks when the vehicle speed is over
10 km/h (saved as history error).
The auto washer output is not sent to the front washer (saved as
history error).
The front washer switch receives the input signal for more than
10 seconds (saved as history error).
Descriptions
RKSTICS (REKES + STICS) / STICS
47
8710
KYRON SM - 2005.09