Removal And Installation Of Seat - SSANGYONG Kyron Repair Manual

6. REMOVAL AND INSTALLATION OF SEAT

Driver's Seat (Power Seat)
1. Slide the seat all the way to the rear and remove the
seal rail mounting bolts (LH/RH: 14 mm - 1EA).
Installation Notice
Tightening torque
2. Slide the seat to the front stop and remove the seat rear
mounting bolts (LH/RH: 14 mm - 1EA).
Installation Notice
Tightening torque
3. Pull up the seat and disconnect the harness connector. Remove the seat assembly.
Release the hook to disconnect the connector.
Connector
on seat
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
35 ~ 55 Nm
35 ~ 55 Nm
Main connector
15
7410
SEAT POSITION WITH MEMORY
KYRON SM - 2005.09