2. REMOVAL AND INSTALLATION OF FRONT DOOR TRIM
Front
1. Unscrew seven mounting screws from the door
trim (refer to figure below).
Tightening torque
3. Separate the bottom of door trim and pull it up to remove.
Locations of Fasteners
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4 ~ 6 Nm
2. Remove the door handle cable (A), door
courtesy lamp connector (B), door
tweeter speaker/memory seat position
switch connector (C) and power window
switch (D) from the removed door trim.
Remove the components as in order
shown in figure below.
29
5110
BODY EXTERIOR
KYRON SM - 2005.09