SSANGYONG Kyron Repair Manual page 876

16
8610
Removal and Installation of Rain Sensor
1. Pry off the rain sensor cover by inserting a small flat-blade screwdriver into service holes at both sides (refer to picture).
NOTICE
• Otherwise, the cover or rain sensor components could be damaged.
Service
hole
2. Disconnect the connector from the rain sensor unit located at the front windshield glass and then lift up the rain
sensor unit to disconnect from the glass.
RAIN SENSOR UNIT (WITH AUTO RIGHT SENSOR)
CHANGED BY
KYRON SM - 2005.09 EFFECTIVE DATE
AFFECTED VIN