Rear Door; Removal And Installation Of Rear Door - SSANGYONG Kyron Repair Manual

REAR DOOR

1. REMOVAL AND INSTALLATION OF REAR DOOR

1. Remove the lower B pillar and the front seat belt
and disconnect the rear door main connector.
Disconnect the Door Wiring Harness.
3. Unscrew the upper and lower hinge bolts and remove the door assembly.
Upper Door Mounting Bracket
Tightening torque: 16 ~ 30 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
2. Unscrew the mounting bolts from the door
check link (vehicle side).
Tightening torque: 20 ~ 31 Nm
Lower Door Mounting Bracket
Tightening torque: 16 ~ 30 Nm
33
5110
BODY EXTERIOR
KYRON SM - 2005.09