Air Bag Module And Other Components - SSANGYONG Kyron Repair Manual

8
8810

4. AIR BAG MODULE AND OTHER COMPONENTS

This section describes the air bag module installed in Kyron. The module consists of the inflator, the cushion, and
the mounting cover.
DAB: Driver Air Bag
The driver's air bag is installed inside the steering wheel. If the acceleration sensor (inside the air bag unit) is
activated by the deceleration from vehicle collision, the detonation is fired by the electrical signal of the air bag unit.
Then, the detonation sets off explosives and nitrogen gas is generated.
At this point, the air bag very quickly deploys and the gas is emitted from the relieving hole to absorb impact upon
the driver.
Components
6
AIR BAG SYSTEM
KYRON SM - 2005.09
Front View
1. Air bag cover
2. Air bag housing
3. Air bag cushion (approx. 50 liters)
4. Inflator
5. Retainer ring
6. Horn switch
Inflator
The inflator is composed of the detonator, explosives,
and the gas generator. It inflates air bag when vehicle
collides.
*
(approx. 190 Kpa)
*
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Rear View