Center Fascia Switch Bezel Assembly - SSANGYONG Kyron Repair Manual

5. CENTER FASCIA SWITCH BEZEL ASSEMBLY

T/C Control Switch
Overview
T/C control switch is the rotary type switch with steps and the switch operation is recognized by TCCU. This switch
has an illumination lamp connected to the tail lamp circuit.
CAUTIONS
• There could be mechanical noises and shocks during
mode changes. However, these are normal conditions
due to mode changing operations.
• Use only the 2H mode on a normal paved surface. Do
not drive your vehicle in the "4H" or "4L" position on
paved road surfaces. Doing so will result in damages
to the drive train.
• Driving in a 4 wheel mode on a normal paved surface
will cause unwanted noises, premature wear of tires,
or increased fuel consumption.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
• To shift from "4L" into another mode or vice versa, stop
the vehicle and depress the brake pedal before any
shift.
• If the "4WD CHECK" warning light stays on, have the
4WD system checked.
• When cornering a curved road in 4WD LOW or 4WD
HIGH drive mode, there could be some mechanical
shocks and resistances in vehicle's drive train. These
are normal conditions due to internal resistance in drive
train when the 4WD LOW is properly working. To avoid
damages to the drive train, do not drive your vehicle
with excessively high speed in sharply curved road.
SWITCHES / ELECTRIC DEVICES
8510 19
TCCU
TAIL LAMP GND
KYRON SM - 2005.09