4. Unscrew two screws and remove the lower center air duct.
5. Disconnect the connector and remove the air bag unit.
Components
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
NOTICE
• When an air bag deploys (curtain air bags and
seat belt pretensioners included), the air bag unit
must be replaced. Please do not attempt to de-
lete the failure code with scan - I because some
data about the deployment situation are stored in
the unit.
• The air bag related components, especially the air
bag unit, must be stored in a sealed case to pre-
vent any damage.
• Please do not connect a tester to any air bag con-
nector or single item to measure the supplied
power or resistance. The detonator may explode
due to a sudden extra power supplied by the
tester.
• Before removing or installing any air bag related
components, disconnect the negative battery
cable.
29
8810
AIR BAG SYSTEM
KYRON SM - 2005.09