SSANGYONG Kyron Repair Manual page 669

Outside Rearview Mirror (OSRVM)
Mirror Position Control
1. The position sensor senses the changes of motors in the mirrors.
2. The mirror position is stored by the memory order of position switch.
3. The mirror position is recalled by the recall order of position switch.
4. The manual adjustment of mirror positions takes priority over the memory and recall orders.
Motor Drive Control
1. Driving sequence
Horizontal → Vertical
2. Control during memory recall
Specifications of the field of vision
1) Horizontal direction: 1.5 ~ 3.7 V
2) Vertical direction: 1.5 ~ 3.7 V
3. LOCK detection
Timer monitors the motor driving time to detect LOCK condition.
1) Monitoring the memory recall time
If the memory recall operation cannot be finished within 40 seconds after activating it, the system stop the
motor output and terminate the control.
Error Detection
Even though the motor runs, if the drive input change (for 5 seconds) from the position sensor doesn't change, it is
determined that the harness circuit is open or the motor/sensor failure occurred.
When an error is detected, any memory set or recall operations are prohibited, but the manual operation is possible.
When the sensor input changes by a manual operation, this error is cleared.
Specification
1. Rated voltage: DC 12 V
2. Operating voltage: DC 9 ~ 16 V
3. Current consumption: Max. 300 mA (not including the load)
4. Operating temperature range: -30°C ~ 75°C
5. Reserve temperature range: -40°C ~ 85°C
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Field of vision:
• The control range of mirror that is not
limited mechanically.
• The control range of that doesn't affect
the sensor characteristics
SEAT POSITION WITH MEMORY
13
7410
KYRON SM - 2005.09