SSANGYONG Kyron Repair Manual page 171

7) Hub and sleeve
8) 1/2 shift fork, pads, synchronizer sleeve
9) 3/4 shift fork, pads, synchronizer sleeve
10) 5th gear shift rail/fork, pads, synchronizer sleeve
11) Reverse fork and reverse idler gear sleeve
6. Check the following components for excessive wear:
1) Crankshaft pilot bushing in front of input shaft
2) Clutch release bearing
3) Main shaft pilot bearing roller
4) Main shaft thrust bearing mating surface
5) Main shaft speed gear roller bearing
6) Main shaft rear bearing
7) Counter shaft front and rear bearing
7. Check the gear sets for wear in teeth surface.
8. Check the gear sets for excessive wear, crack and
break and replace if needed.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
47
3170
MANUAL TRANSMISSION
KYRON SM - 2005.09