SSANGYONG Kyron Repair Manual page 343

4. Install the special tool to the coil spring and compress the coil spring with the tool. Unscrew the upper nut (17 mm) on the
shock absorber.
Tightening torque: 30 ~ 45 Nm
5. Tighten the special tool to compress the coil spring. Remove the coil spring and spring seat while pulling down
the coil spring link.
6. Unscrew the bolt (10 mm) and remove the parking brake cable and wheel speed sensor.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4520
Tightening torque: 6 ~ 8 Nm
SUSPENSION
KYRON SM - 2005.09
39