SSANGYONG Kyron Repair Manual page 873

Washer Coupled Wiper Function
Check the washer coupled wiper operation by pressing the washer switch.
Irregular Operations (Abrupt Operations)
1. Check the sensor for coming off.
2. Check the rain sensor cover installation.
3. Check that the customer is familiar to how to control the wiper sensitivity.
Check that the customer can select the sensitivity by selecting the variable resistance value (stage 1 to stage 5),
that is, the wiper sensitivity control value. And, also check whether the sensitivity is selected to the highest value
of FAST (stage 5).
4. Check the wiper blade for wear.
If the wiper blade cannot wipe the glass uniformly and clearly, the irregular operations could be occurred. And, the
wiper blade should be replaced with new one with same specifications.
Self Diagnosis
Poor Sensing
Position the wiper switch to "AUTO" position and rotate the variable resistance knob from "FAST" toward
"SLOW" by one step. At this moment, check if the wiper operates one cycle.
The wiper operates when the windshield glass is excessively worn or scratched, the windshield glass is not cleared
wiped due to using worn wiper blade or different wiper blade, or the rain sensor is not improperly installed.
Poor Sensor
Rotate the variable resistance knob toward "SLOW" by 1 more steps. At this moment, check if the wiper
operates one cycle.
If the wiper operates, this causes when the sensor is defective or the sensor has the communication problem with
STICS.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
RAIN SENSOR UNIT (WITH AUTO RIGHT SENSOR)
13
8610
KYRON SM - 2005.09