12
7340
Front/Rear Gap of Glass Panel
To avoid the abnormal noise due to interference between roof panel and rear section of sunroof glass panel while
driving, the installation gap should be maintained the ratio of 4:6 (front:rear) when installation.
After Assembly
Measure the interference between roof and glass panel while moving the glass panel.
Gap between roof and glass panel should be approx. 5 mm. If this gap is too small, the glass panel may be
scratched or the interferencing noise may sound.
Gap between roof and glass
panel: approx. 5 mm
SUNROOF SYSTEM
KYRON SM - 2005.09
6
4
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN