SSANGYONG Kyron Repair Manual page 396

10
4890
The rubber O-ring in IWE (Integrated Wheel End) should be replaced with new one when the front wheel end has
been removed.
The rubber O-ring prevents moisture and foreign materials from entering the IWE system.
In addition, when installing the hub actuator of the IWE system, you must install it from the same angle as the drive
shaft to prevent the rubber seal ring inside the actuator from being squeezed.
Rubber
O-ring
Rubber seal ring
(Internal steel spring included)
Please refer to the part time transfer case section for more specific information.
ABS/ESP SYSTEM
CHANGED BY
KYRON SM - 2005.09 EFFECTIVE DATE
AFFECTED VIN