SSANGYONG Kyron Repair Manual page 419

Removal and Installation
1. Disconnect the control unit connector.
2. Disconnect the primary and secondary master cylinder
pipes from HECU.
Tightening torque
Master cylinder to HECU
3. Disconnect the front and rear wheel brake pipes.
Tightening torque
HECU to each hydraulic line
NOTICE
• Be careful not to damage the HECU pipes and nut
threads when reinstalling.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
13 ~ 20 Nm
13 ~ 20 Nm
33
4890
ABS/ESP SYSTEM
KYRON SM - 2005.09