SSANGYONG Kyron Repair Manual page 395

9
4890
Cautions When Removing the Front Wheel Speed Sensor
The locking hub system of the KYRON part time 4WD utilizes a different hub actuator from the
conventional approach. It utilizes IWE (Integrated Wheel End) system that locks the 4WD depending
on the vacuum condition within the actuator.
Thus, the wheel speed sensor is installed on the front wheel end area. It is installed inside the
backing plate to be protected from heat and foreign materials. Therefore, the front wheel end
system (including disc) should be removed before removing the front wheel speed sensor.
Front Wheel Speed Sensor (4WD) Rear Wheel Speed Sensor (IRS Type)
Backing plate
Wheel speed sensor
Wheel Speed Sensor
Backing plate
Wheel speed sensor
ABS/ESP SYSTEM
CHANGED BY
EFFECTIVE DATE KYRON SM - 2005.09
AFFECTED VIN