SSANGYONG Kyron Repair Manual page 604

20
8710
Speed Sensitive INT (Intermittent) Wiper
For RKSTICS without the rain sensor, perform the following operation:
1. Controls the wiper intermittent operation by the values from the vehicle speed and the volume.
1) Calculates and converts the Intermittent interval automatically by using the INT VOLUME when the ignition
switch is in the "ON" position and the INT switch is in the "ON" position.
2) The wipers are operated in vehicle speed sensitive mode when turning the INT switch to the "ON" position with
the engine running or starting the engine with the INT switch positioned to "ON".
3) Intermittent interval (at 0 km/h): 3 ± 0.5 ~ 19 ± 2 seconds
2. Vehicle speed calculation
[Input the vehicle speed]
It is calculated by the numbers of input pulses for one second.
1 [PULSE/SEC] =
3. VOLUME calculation
The pause time of the vehicle speed sensitive INT wiper is calculated by the INT volume (input voltage). Each level
has the hysteresis.
4. Pause time calculation
1) Pause time: the duration that wipers are stopped at parking position
2) Elapsed time: the duration after the wiper motor started to operate from parking position
3) The pause time is calculated by the vehicle speed and the VOLUME.
• If the pause time is below 1.0 second, the wipers operate without pause.
• If the pause time is over 1.5 seconds, the wipers operate intermittently.
RKSTICS (REKES + STICS) / STICS
KYRON SM - 2005.09
60 [km/h] X 60 [sec]
637 X 4 PULSE
1.41 [km/h]
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN