SSANGYONG Kyron Repair Manual page 335

6. Remove the lower arm from the frame and the axle.
1) Remove the wheel speed sensor cable (1) and the parking cable (2) mounting bolt (12 mm) when removing
the lower arm.
2) Unscrew lower arm mounting bolt/nut (22 mm) on
frame.
Installation Notice
Tightening torque
3) Unscrew lower arm mounting bolt/nut (22 mm) on
axle.
Installation Notice
Tightening torque
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Mounting bolt
150 ~ 180 Nm
150 ~ 180 Nm
31
4510
SUSPENSION
KYRON SM - 2005.09