SSANGYONG Kyron Repair Manual page 352

48
4520
Coil Spring Link Assembly
Preceding Works:
1. Remove the tires.
2. Unscrew the bracket bolts and lower the stabilizer bar.
3. Remove the coil spring.
Unscrew the lower shock absorber bolt on coil spring link and the bolt/nut on sub frame of the coil spring link and
knuckle to remove the coil spring link assembly.
Bolt/Nut on Lower Shock
Absorber (Knuckle Side)
Tightening torque:
120 ~ 150 Nm
1. Bolt and nut (lower shock absorber)
2. Bolt and nut (knuckle, 22 mm)
SUSPENSION
KYRON SM - 2005.09
Tightening torque:
60 ~ 80 Nm
Bolt and nut (sub frame, 22 mm)
Camber Adjustment
Make an alignment mark on camber
adjusting nut/bolt before removing them.
Rear Suspension (Module Side)
Tightening torque:
110 ~ 130 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN