SSANGYONG Kyron Repair Manual page 825

DSP Amplifier
Preceding Work: Disconnect the negative battery cable.
1. Disconnect the connectors and the fiber optic cable from the AV head unit. Unscrew the mounting bolts and
remove the amplifier assembly.
Check if the fiber optic cable is defective. If the red
lamp comes on when the ignition switch is in "ON"
position, the system receives the normal input
signal.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Unscrew six mounting bolts (10 mm) from the
amplifier.
Output signal from AV head unit
Optical
sensor input
21
8932
Main connectors
AV SYSTEM
KYRON SM - 2005.09