38
4520
Rear Suspension Module
1. Remove the tire (21 mm - 5 wheel nuts).
Installation Notice
Tightening torque
2. Remove the brake disc caliper and set the removed caliper on the frame (17 mm - 2 bolts).
Tightening torque: 85 ~ 105 Nm
3. Unscrew the two stabilizer bar mounting bracket bolts (14 mm) from body (frame) and remove the stabilizer bar.
SUSPENSION
KYRON SM - 2005.09
120 ~ 140 Nm
Mounting bracket
Remove and tighten the wheel
nuts in several steps in a
crisscross sequence.
Tightening torque: 40 ~ 60 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN