SSANGYONG Kyron Repair Manual page 800

Hide thumbs Also See for Kyron:

Table of Contents

Description of Theft Deterrent Function

1. Armed mode activation requirements

1) The "LOCK" output is "ON" when receiving the "LOCK" signal from transmitter while the ignition key is re-

moved and all doors are closed. The armed mode is activated when the door lock switch is locked (theft

deterrent horn output: once, hazard relay output: twice).

2) The theft deterrent horn and hazard relay outputs are "ON" when receiving the "LOCK" signal from the remote

control key again in armed mode (theft deterrent horn output: once, hazard relay output: twice).

3) When receiving "LOCK" signal from the remote control key while any of doors is not closed, only the "LOCK"

output can be done and then activates the armed ready mode (without theft deterrent horn and hazard warning

flasher). At this moment, if the ignition key is in the ignition switch or the door lock switch is unlocked,

cancels the armed mode and activates the normal mode.

However, in these cases, if closing the door, the theft deterrent horn outputs once and the hazard warning

flasher outputs twice and then activates armed mode.

4) When the door is not opened or the ignition key is not inserted into ignition switch for 30 seconds after

receiving "UNLOCK" signal, outputs "LOCK" and then activates armed mode (RELOCK operation). Also, at

this moment, the system outputs the theft deterrent horn and hazard warning flasher.

5) The armed mode will not be activated except above conditions.

Ex) The armed mode will not be activated when the door is locked by the ignition key.

DOOR LOCK SW

HAZARD RELAY

SWITCHES / ELECTRIC DEVICES

KYRON SM - 2005.09

EFFECTIVE DATE

AFFECTED VIN

Chapters

Table of Contents